
Loading image.......please wait
iSeries Profiles Honoree Cushion Firm
The
Honoree Cushion Firm is the lowest model in the
iSeries Profiles Collection of mattresses updated for 2014 by
mattress manufacturer
Serta. It is also one of the two lowest-priced models in this collection—the other is the
Honoree Super Pillow Top. This is a medium firm mattress with a firmness level of 4 (on a scale of 10 with 1 being the softest).
The featured components of the
iSeries Profiles Honoree Cushion Firm are Serta®
PillowSoft™ Foam,
EverFeel™ Technology,
Cool Action™
Dual Effects® Gel Memory Foam, and
Duet® Coil Individually Wrapped Coil-in-Coil Support System with
BestEdge® Foam Encasement. The last three of these are signature features of the
iSeries Profiles Collection.
The
polyester cover fabric is quilted with
Pillo-Fill and
FireBlocker. Just below this is a layer of Serta®
PillowSoft™ Foam. The role of the
PillowSoft is to moderate the firmness close to the sleeper.
The next layer is
EverFeel™ Technology.
EverFeel was developed to yield the cradling conformity of
memory foam without its inherent problems of time for adjustment and build-up of heat. This is the one feature which sets the
iSeries Profiles Collection apart from the
iSeries Hybrid Sleep System.
Cool Action™
Dual Effects® Gel Memory Foam is an upgrading of the
Cool Action™ Gel Memory Foam previously used in
iComfort and
iSeries mattresses. It still has the
MicroSupport® gel, with the gel beads concentrated where additional support is needed.
Dual Effects also has
MicroCool+™ gel to draw heat from the sleeping surface and convey it to where it can dissipate. This new foam has 25% more
gel than the prior version.
The support unit of this hybrid mattress is the
Duet® Coil Individually Wrapped Coil-in-Coil Support System
innerspring. the imdividually wrapped pocket coils are
dual coils. Each dual pocket coil is two coils made of one wire. The taller outer coil has fewer turns for a softer response, while the shorter inner coil has more turns and is firmer. These
Duet® Coils have a cushioning initial feel followed by deep support. These coil-in-coil pocket coils are conforming for pressure relief and dampen motion transfer. For 2014 the coil density was increased from 924 to 1008 in Queen size.
The
BestEdge® foam encasement provides edge support for the mattress as well as perimeter support for the innserspring unit.
StabL-Base Foundation
The recommended foundation for the iSeries Profiles Honoree Cushion Firm is the StabL-Base Foundation. This is a platform with wood base and V-shaped supports. It provides more consistent support for the pocket coils than a traditional box spring. The Honoree Cushion Firm is also compatible with adjustable beds, such as the Serta Motion Perfect.
The Honoree Cushion Firm of the iSeries Profiles Collection is available through several online and in-store retailers. It is covered by Serta's 25-year limited warranty against manufacturing and materials defects with the first 15 years non-prorated.
-
Mattress and Bed Set Model Name
iSeries Profiles Honoree Cushion Firm
-
Price Category
$$$
-
Listed Manufacturer
Serta
-
Location
Serta International, Customer Service Department, 3 Golf Center #392, Hoffman Estates, IL 60169, 1-888-55-SERTA (1-888-557-3782)
-
Bed Classification
Hybrid - memory foam and coils
-
Level of Firmness
Firm
-
Inner Bed Composition
dual coil-in-coil pocket coils with foam comfort layers
-
Mattress Edge Support
Foam encasement
-
Mattress Cover Composition
Polyester quilted with PilloFill and FireBlocker
-
Total Mattress Height
13.5 inches
-
Bed Foundation
Platform or adjustable bed
-
Special Features
Dual Effect gel memory foam, EverFeel Technology, and 2-in-1 pocket coils
-
Sleep Trial
100-nights
-
Bed Warranty
25-year limited warranty
-
Manufactured In
U.S.A.
-
Restrictions
Keep in sanitary condition, and provide proper foundation
-
Website
www.serta.com
Add your reviews about iSeries Profiles Honoree Cushion Firm
This is members only feature. If you are already a member, please sign in or you can sign up for free.